2025 ATC Stacker ROM 800 26ft Aluminum Enclosed Trailer with Tiltable Lift

$90,599.00

A 26 ft. aluminum ATC Stacker ROM 800 riding on three 6,000 lb spread Dexter torsion axles, with a tiltable 14 ft. stacker lift and about 11 ft. 4 in. of interior height. Finished with black cabinets, coin TPO flooring and a 6,000 lb rated ramp door.

Standard Tilt-Bed Freight Shipping
  • Shipping FeeFREE — Lower 48
  • Puerto RicoFlat $550
  • Order Handling1 – 3 Business Days
  • Transit Time3 – 7 Business Days
  • Estimated Arrival4 – 10 Business Days
  • Returns30-Day Return Policy
Guaranteed Safe Checkout
VISAAMEXDISCOVERPayPalPayGPay
SKU: ACS-2476 Category:

Description

Twenty-Six Feet of Aluminum, Stacked Two Cars High

Where the shorter stackers ask you to be clever about what goes where, the 26-foot ATC ROM 800 simply gives you more room to work with. The tiltable 14-foot lift raises one vehicle onto an upper deck so a second can roll in beneath it, and roughly 11 ft. 4 in. of interior height gives the lift the headroom it needs to do that with real cars rather than only low-slung ones. The .050 white screwless aluminum exterior keeps the weight down and the panel seams clean.

Three 6,000 lb spread Dexter torsion axles sit underneath, and the spread layout is the point: it distributes a heavy two-car load over a longer footprint, which settles the trailer down at highway speed and reduces the pitching a tandem setup shows over expansion joints. A 2-5/16 in. flat nose coupler and a hydraulic tongue jack handle the front end, and the flat nose itself buys back usable floor length that a V-nose spends on aerodynamics.

Loading, Egress and the Interior

The ramp door is rated at 6,000 lbs, so it is built for the vehicle rather than for foot traffic, and a premium escape door gives a driver a way out when both decks are occupied and the ramp is up. Inside, white screwless aluminum walls and ceiling reflect the light around, black coin TPO flooring handles jacks and creepers, and black straight overhead and base cabinets store what a race weekend requires. Four 5,000 lb D-rings anchor the loads, aluminum wheels cut unsprung weight, and an interior spare tire mount carries a matching aluminum spare.

Specifications

  • 26 ft. aluminum ATC Stacker ROM 800
  • Three 6,000 lb spread Dexter torsion axles
  • .050 white screwless aluminum exterior
  • Approximately 11 ft. 4 in. interior height
  • Hydraulic tongue jack, 2-5/16 in. flat nose coupler
  • Tiltable 14 ft. stacker lift
  • Ramp door rated 6,000 lbs
  • Premium escape door
  • Four 5,000 lb D-rings
  • White screwless aluminum walls and ceiling
  • Black coin TPO flooring, black straight overhead and base cabinet
  • Spoiler with three LED lights
  • Premium LED electrical package, prep for a 20 ft. Girard 12V awning
  • Aluminum wheels, interior spare tire mount with aluminum spare
  • Carries a 5-year limited structural warranty from the manufacturer

Plan the route before you plan the load. A stacker’s exterior height puts it near the ceiling of most drive-throughs and older overpasses, so know your clearance numbers and check them against the roads you actually use. Then plan the loading order, because with a lift the sequence is not reversible mid-job: the upper car goes first and comes off last. Finally, be honest about the tow vehicle. Three axles and two cars is one-ton territory with a hitch rated for the full combined weight, not a job to hand to a light-duty truck.

No freight charge applies to this ROM 800 anywhere in the contiguous 48 states, and Puerto Rico ships at a flat $550. We settle up by direct bank transfer and schedule the haul once it clears, usually arriving inside 4 to 10 days. See what else is listed under Enclosed Trailers, or read the full shipping terms before you order.

Additional information

Year

2026

Make

ATC

Trailer Type

Enclosed Car Hauler

Construction

Aluminum

Length

26 ft

Condition

New

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.