3m x 2.1m Flat Pack Storage Container — Galvanized & Powder-Coated, Double Lock (New)

$1,560.00

New 3m flat pack storage container with galvanized body and powder-coated finish. Double locking system, 15mm OSB floor rated to 1,500 kg, 300mm flat-packed height. Manual assembly — no machinery required. Inspected before dispatch by Atlas Container Supply.

Standard Tilt-Bed Freight Shipping
  • Shipping FeeFREE — Lower 48
  • Puerto RicoFlat $550
  • Order Handling1 – 3 Business Days
  • Transit Time3 – 7 Business Days
  • Estimated Arrival4 – 10 Business Days
  • Returns30-Day Return Policy
Guaranteed Safe Checkout
VISAAMEXDISCOVERPayPalPayGPay
SKU: ACS-266 Category:

Description

The 3m x 2.1m Flat Pack Storage Container from Atlas Container Supply is a durable, wind- and watertight steel unit engineered for secure, long-lasting performance.

This 3m x 2.1m flat pack storage container is the smallest single-unit option in our flat pack storage range — a compact, lightweight galvanised steel structure with a powder-coated topcoat finish, assembled on site without cranes, forklifts, or specialist tools. At a flat-packed weight of just 351 kg with a heaviest single component of 120 kg, this is the most easily handled unit in the range, manageable by a small team in locations where even a 4m unit would be difficult to position — narrow side passages, interior courtyards, school corridors, and restricted garden access points.

Unlike the single 4m units which are available in either bare galvanised or powder-coated finish, this 3m unit combines both finishes as standard — a galvanised steel substrate for structural corrosion resistance, with a powder-coated topcoat for additional protection and a cleaner exterior appearance. Color is specifiable at time of order — confirm available color options with Atlas Container Supply before ordering.

The double locking system is included as standard at no additional cost. The 15mm OSB board floor supports up to 1,500 kg evenly distributed — note this is lower than the 2,000 kg rating on our 4m units, reflecting the smaller floor area. The internal height of 2.00m provides 5mm more headroom than the 4m units, though the difference is negligible in practical terms. The flat-packed profile of just 300mm height matches the 4m powder-coated unit and can be transported upright in a standard van or laid flat in a pickup truck bed.

This unit is fully linkable with other flat pack units in 2m, 3m, and 4m sizes — side-by-side or end-on-end, one direction only per structure. A 3m unit is the base component of our 6m end-linked powder-coated bundle and 6m galvanised end-linked bundle — purchasing this unit individually allows buyers to start with one 3m store and add a second later to form a linked 6m configuration.

3m Flat Pack Storage Container — Dimensions

DimensionImperialMetric
External Length9ft 8in2,950mm
External Width7ft2,140mm
External Height6ft 10in2,090mm
Internal Length9ft 2in2,800mm
Internal Width6ft 9in2,070mm
Internal Height6ft 6in2,000mm
Door Width4ft 1in1,250mm
Door Height5ft 10in1,800mm

3m Flat Pack Container — Weight & Transport Specifications

SpecificationImperialMetric
Total Weight (flat-packed)774 lbs351 kg
Heaviest Single Component265 lbs120 kg
Flat-Packed Length9ft 8in2,950mm
Flat-Packed Width7ft2,140mm
Flat-Packed Height11.8in300mm
Floor Load Rating3,307 lbs evenly distributed1,500 kg evenly distributed
Steel Gauge0.028in0.72mm
Floor Type15mm OSB board15mm OSB board

Standard Inclusions

  • Single 3m galvanised and powder-coated steel flat pack storage unit
  • Powder-coat color of your choice — specify at order
  • Double locking system — standard at no extra cost
  • 15mm OSB board floor — rated to 1,500 kg evenly distributed
  • Galvanised steel internal wall panels
  • Key-lockable door assembly

What’s Not Included

  • Assembly labor — small team recommended for safe handling
  • Socket set for assembly
  • Foundation or ground preparation
  • Shelving or internal storage fittings
  • Lifting eyes — confirm with supplier
  • Linking kits for multi-unit configurations — available separately
  • Local authority permits (if required for permanent installation)

Best Use Cases for the 3m Flat Pack Storage Container

  • Home garden storage in narrow or restricted-access locations
  • School and community group equipment storage in tight internal spaces
  • Construction site hand tool and consumables storage where a 4m unit is too large
  • Sports club small equipment and kit storage
  • Starter unit for a future linked 6m configuration — add a second 3m unit later
  • Tradespeople requiring a compact, van-deliverable secure site store

Also available: 4m Powder-Coated Flat Pack Container Store, 6m End-Linked Flat Pack Bundle — Green Powder-Coated, and 6m End-Linked Flat Pack Bundle — Galvanised.

Every unit is inspected by Atlas Container Supply prior to dispatch.

3m x 2.1m Flat Pack Storage Container Overview

The 3m x 2.1m Flat Pack Storage Container combines rugged construction with everyday practicality, making it a smart long-term investment. Supplied in new condition, it arrives quality-inspected and ready for immediate use across residential, commercial, and industrial applications.

Key Features of the 3m x 2.1m Flat Pack Storage Container

  • Galvanised & Powder-Coated
  • Double Lock
  • Ships flat-packed for low-cost delivery
  • Assembles on site in hours with hand tools

Ideal Uses

The 3m x 2.1m Flat Pack Storage Container is a versatile flat pack container suited to a wide range of jobs, including:

  • Rapid-deploy storage and site rooms
  • Temporary offices and welfare units
  • Secure tool and equipment stores

Construction & Durability

Every panel on this 3m flat pack unit is factory-fresh one-trip steel, formed into corrugations that carry load across the wall rather than through it. That is why a container this size can be stacked several high fully laden and still open cleanly on a level pad.

Delivery & Site Preparation

Your 3m flat pack unit arrives on a tilt-bed and is placed directly on your prepared pad. Allow about 75ft of clear, straight approach so the bed can tilt and slide the unit off. Overhead clearance is the detail people forget: branches and low lines will stop a tilt delivery cold, so check the approach as well as the pad.

Why Buy From Atlas Container Supply

Buying new means you see no wear at all: no dents, no patch welds, no previous cargo. That grading is the whole point: it tells you what you are paying for. Cross-shop Flat Pack, or start with the buyers guide if this is your first container.

3m x 2.1m Flat Pack Storage Container – Frequently Asked Questions

What can I use it for?

This unit is ideal for rapid-deploy storage and site rooms, temporary offices and welfare units, and more — it adapts easily to residential, commercial, and industrial needs.

Is delivery included?

Yes — delivery is free on every order, and shows as $0 at checkout. The truck tilts and slides the unit onto your ground, so no crane hire lands on your bill.

Can I return it?

Within 30 days, yes. We inspect before shipping specifically so this does not come up — but the policy stands either way.

Ready to order? Add the 3m x 2.1m Flat Pack Storage Container to your cart today and enjoy quality-inspected stock, secure checkout, and reliable delivery across the Lower 48 from Atlas Container Supply.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.